Plastic Doors

  • Measurements according to your specifications
  • Wide selection of colours
  • On-site measurement services

For more information,
please contact our specialist

Garnet 70

Profile thickness
70 мм

Number of chambers
5

Water resistance class
6 A

Soundproofing
up to 40 db

Wind-resistance class
C 3

About profile system

  • Is not exposed to sunlight and other external factors, does not deform. The special grey EPDM gasket ensures perfect tightness.
  • Lamination with double-glazed windows provides sound insulation
  • The difference in height between the outer and inner membrane of the drainage channels, prevents storm water from getting inside under the influence of the wind. And also these channels, which are not adjacent to the reinforcing metal, provide ventilation.
  • The recesses located under the profile ensure easy assembly and disassembly, provide accurate, uniform window installation, and reduce heat transfer.
  • The stability of the profile against external factors is ensured by a specially designed galvanized reinforcing metal with two grooves.
  • The glazing beads have a slope of 15°, thanks to which dust does not collect on them and the glazing beads, adhering to the glass, provide it with additional support.

 

Booklet and test reports

Holand 120

Profile thickness
120 мм

Number of chambers
8

Water resistance class
6 A

Soundproofing
up to 44 db

Wind-resistance class
C 3; C 5

Fittings
VORNE

Possible glazing thicknesses
24 мм; 44 мм

About profile system

  • Provides sound insulation up to 44 decibels with acoustic glass option.
  • Designed to facilitate water drainage, it is highly waterproof.
  • Thanks to the use of reinforced hinges, it ensures that the sash does not sag.
  • Aesthetic integrity is ensured by the oval structure of the profiles.
  • The profile has functions for solving all kinds of architectural and technical details with detailed profiles integrated into the main profiles.
  • The strength values of the system allow it to be used in multi-storey buildings.

 

Certification and test reports

T-line

Profile thickness
70 мм

Number of chambers
5

Water resistance class
6 A

Air permeability
4th grade

Wind-resistance class
C 3

Fittings
VORNE

Possible glazing thicknesses
24 мм; 40 мм

European coefficient of thermal conductivity
Uf = 1.3 Wm2K

Heat saving
0.849 m² ° С / W

Fittings
VORNE

Possible glazing thicknesses
24 мм; 40 мм

About profile system

  • Classic design, incorporating the best technical solutions, will make a worthy contribution to the design of your home, while lamination options will organically fit T-line windows into your chosen interior.
  • T-line window manufacturing technology will protect your loved ones from the round-the-clock noise and unpleasant odours of the streets, allowing you to enjoy full-fledged family communication.
  • The special five-chamber frame profile makes the T-line one of the most heat-saving window systems: it will reliably maintain the optimal temperature regime for you, protecting the health and comfort of your family.
  • A double-glazed window unit with a combination of sun-protection and heat-saving glass significantly reduces heat loss, saving your budget, and the picture outside the window will not look overcast.
  • Smooth glossy profile is easy to keep clean and tidy: unlike wooden frames that have a rough surface and require periodic cleaning and painting, T-line windows are very easy to maintain and save you time, allowing you to devote it to family and friends.
  • Reinforced T-line frame and sash construction and the ability to install anti-burglar fittings will turn your home into an impregnable fortress, providing a high level of security.

Сatalog, Certification and test reports

Colour catalogue

Look

Manufactured Door Designs

Single-leaf door with plastic threshold

  • It perfectly retains heat and protects the door from blowing through due to hermetically sealed hold-down
  • It does not have high resistance to wear, therefore it is not intended for premises with high traffic
  • Fairly high threshold. It hinders movement of, for example, strollers

Single-leaf doors with aluminium threshold

  • The aluminium threshold prevents blowing from underneath and drafts, dust accumulation, damage to the floor covering, and also acts as a decorative element of the entire structure.
  • Prevents gaps between the floor and the leaf.
  • Improvement of heat and sound insulation functions of a plastic door.
  • The threshold also serves as a reinforcing link in the entire structure.
  • Protects the bottom of the plastic door frame.

Double-leaf doors

For wide doorways, double-leaf doors or doors with an extension are suitable.

For double doors and extension doors, the active and passive parts are attached to the same frame and both open.

Double-leaf doors are widely used between the hallway and living room, as well as the entrances to commercial premises.

By opening both leaves of the door, you can easily and simply increase the space of the living room, and visually more space is created by the use of double-leaf doors with glazing.

If the doorway is too wide for a single-leaf door, but too narrow for a double-leaf door, then the solution here is a door with an extension. An extension is a small narrow door that is mounted in a common frame with a single-leaf door.

Doors with showcases

This design is an option for glazing of a large opening with maximum cost savings.

Sliding doors

Sliding door systems have long been a permanent trend in interior design. In addition to their refined and elegant appearance, they have excellent functionality, practicality and ergonomics.

Folding doors (accordion doors)

This type of door is quite often recommended for designers for installation in small-sized apartments, since the mechanism for closing them can significantly save space. Significant space savings.

This design requires professional assembly.